This shows the Centech Ap-1 fuse box, the relay (with the sliver connector), the two heartollers for the grips and the jacket and a lot of wiring.
Removing the hand grips with a little hairspray and a screwdriver.
A naked throttle grip, ready for action.
The grip heater before installation. The red and blue wires connect to separate paths to the common ground, in white.
The clutch side grip warmer installed. It has a self adhesive back. Grips slide right over it.
With a piece of the fairing removed, it was easy to tun the wires from the fuse box to the cockpit.
